ISoft DA CG V E 150

Water softener unit for large size carwash sites.

DA/CG and Softener series are equipped with an electronic valve with a micro-processor allowing the resins to be regenerated after a prefixed volume of water used. The softener has an easy programming (with a digital display). Thanks to the automatic electronic valve our softeners have a micro-processor which allows all the data about the operation of the softener and also during the stages of regeneration the user’s water is guaranteed (automatic by pass included).

High fidelity of valve group in granted from high quality of material employed and use facility. Resin regeneration is started from an internal drive shaft open and close sequence of various phases. During regeneration, normally programmed by night, water flow is ensured through an automatic By-Pass. This volumetric model is due in case of discontinuous water need (being difficult to determinate regeneration program). Softener is programmed for regeneration during the night and it considers a soft water reserve for about one working day (delayed regeneration).

Resin tank

This in made of fiberglass reinforced polyester, a further outer protective coat of polyurethane paint improves appearance. 

Brine tank or monobody/boxed range

This in made of polyethylene and includes:

• Float valve or system of suck up
• Salt grating
• Safety overflow

Automatic valve (electronic valve with a digital display)

This in the monobloc hydraulically operating type made of brass + noryl:

• Interchangeable ejector to intake the brine
• Automatic by-pass for untreated water during the resin regenerating phase
• Electronic or mechanical

Request offer