Our catalogue:
Bionic 40
Scope of supply
To be installed in a pump pit
- 1 Floating aerator, for oxygen saturation (32 mm air hose excluded);
- 1 Grinderpump, for cutting all big particles and to pump up the water (40 mm water hose excluded, 10 mtr power cable included);
- 1 Float switch, for low water protection of the grinderpump (10 mtr power cable included).
Control frame
- 1 Stainless steel frame of 500 x 500 x 1630 mm (20” x 20” x 64”) on which all following components are built;
- 1 Low pressure air blower of 52.000 ltr/h (8500 GPH) with air intake filter, for the floating aerator and the bioreactor;
- 1 Air manifold, for one floating aerator and up to maximum 4 bioreactors;
- 2 Air flow meters with valve, for controlling the air towards each bioreactor;
- 1 Water pressure indicator Bar/PSI, for reading the water pressure towards the cyclone;
- 1 Water manifold, for up to maximum 4 hydro-cyclones;
- 2 Hydro-cyclones of 2.000 ltr/h (500 GPH) each, for separating all particles bigger then 5 micron (0,005 mm) before entering the bioreactors;
- 1 Control cabinet with main switch, all necessary components and control lights;
- 1 Nutrient can support in stainless steel, mounted on the side of the frame;
- 1 can of 10 liter (2.6 Gal) Rowafil SR20 Nutrient, for stimulation of the biological process. Usage, only one can per 5 months;
- 1 Small nutrient dosing pump, installed on the can support;
Bioreactor
- 2 Stainless steel bioreactors in unique 8-shape of 750 x 1225 x 1925 mm (30” x 48” x 76”) each, for biodegradation of all organic waste via an internal down flow biobed. On the top a 600 mm (24”) round entrance with sealed cover, 1½” ventilation socket, 1½” air inlet socket and an 1½” water inlet socket. On the front at the bottom a 63 mm (2½”) PVC automatic flush valve 24V S4 and on the front at the top a 2” clean water out socket (for pipe 50 or 63 mm). The whole reactor is placed on 2 stainless steel beams.
- 2 bottles of biological process start up, 1,1 liter (0.29 Gal). The Rowafil Startup Accelerator is concentrated biomass for a fast and controlled biological start.
Various
- 4 reinforced hoses for connection of air and water between frame and bioreactors;
- 3 pallets with 3 complete covering boxes for safe shipment of the Bionic 40.
Type: | Bionic 40 |
Capacity: | 4000 ltr/h / 1000 GPH |
Bioreactors: | 2 |
Frames and cyclones: | 1 frame with 2 cyclones |
Floor dimensions: | 1300 x 2200 x 1975H mm |
Sludge pit: | 5000 ltr. minimum |
Aerationpit: | 3000 ltr. minimum |
Recycle water tank/pit: | 1000 ltr. |
Power supply: | 2,9 kW |
SR20 nutrient consumption: | 10 ltr. per 5 months |